IoT Europe 2015 – Perytons was there!

In the IoT Europe 2015 exhibition that took place in Berlin this year Perytons presented its traditional analyzer line along with Network Visibility and IoT Defense centralized solutions. The conference emphasized an increasing interest from R&D companies, Service Providers as well as Operators and Integration companies that already have or plan to deploy IoT systems.…

Details

Converting other ZigBee sniffer capture files to Perytons format

In case you have IEEE 802.15.4 / ZigBee data files captured with other analyzers (e.g. Daintree .dcf files, TI .psd files, Wireshark with IP payload .pcap or Ember .isd files) you can convert them to the Perytons™ Protocol Analyzer format (.ANL) and analyze them within the Perytons™ Protocol Analyzer environment (including the free evaluation version).…

Details

Transmit messages from a Perytons Format (.anl) file

The Traffic Generator (TG) Add-On allows you to transmit messages (in parallel of your capturing process) – With this Add-On you can create, edit and transmit messages from a Perytons Format (.anl) file or, when combined with a Scripting Add-On module, transmit messages based on a message that has been received, etc. Regarding the option…

Details

How to use the analyzer with a secured BLE session

When trying to capture for example a session between an application running on an iPad (master) and a Bluetooth device (slave), if the analyzer capture the Attribute Protocol interactions between the two but shows anything higher in the stack than the L2CAP layer , then its a security issue. In order to solve it, see…

Details

Triggering data transmission and capture of the ZigBee sniffer or PLC analyzer via command line

Integrated with the Perytons™ Protocol Analyzer basic license is the Protocol Analyzer Player feature. The Perytons™ Protocol Analyzer Player allows controlling the capture (and traffic generation if applicable) functions from a command line: With the Perytons™ Protocol Analyzer Player the user can set to automatically run the analyzer application and start or end a capture…

Details

Changing the capturing channel through a Script

When performing a single channel process, scripts can be used to set the current capture channel. This process, for example, can be used to change the capturing channel of the analyzer after receiving a relevant ‘Channel Change’ (in a network using ZigBee channel agility). The following figure describes a scenario where a single channel analysis…

Details